(4) A-80-P BED RAIL - 80”
(28) A-35 REGULAR SLAT - 35”
(4) A-35-C CONNECTOR SLAT - 35”
Parts:
(2) A-70F BED ENDS - 70”
Align a Left Leg (A-15L) and Right Leg (A-15R)
so that the rail pockets are on the front.
Turn the Bed End (A-70F) so that the
pocket holes are facing the front.
Then push the dowels into the holes on the
legs. Repeat for the other Bed End.
Use a phillips screw driver to attach
the Legs to the Bed End using
(4) 1 - 1/2” Wood Screws (H-20).
Repeat for the other Bed End.
1
RAIL POCKETS MUST
ALL BE ON THE
SAME SIDE
A-15L
A-15R
THESE POCKETS
SHOULD BE TOWARDS
THE TOP
(2) A-14 CENTER LEG - 14”
(2) A-15L LEFT LEG - 15”
(2) A-15R RIGHT LEG - 15”
Use 2 - 1/2” Bolts (H-21) and
Cross Dowels (H-3) to attach
Bed Rails (A-80-P) to the Bed Ends.
The pockets in the Bed Rails should
be facing in and open to the top.
Leave all bolts loose until everything
is attached. Then tighten all bolts.
PLEASE RETIGHTEN
BOLTS
AFTER 30 DAYS
2
H-21
H-3
NOTE:
Place the best looking rail
on the outside to make
your frame look its best.
NOTE:
Rail pockets must
face the inside.
H A R D W A R E L I S T
1
H-10 HEX WRENCH
H-3 CROSS DOWEL
24
24
H-21 2 - 1/2” BOLT
#2 PHILLIPS HEAD SCREW DRIVER REQUIRED
H-20 1 - 1/2” WOOD SCREW
16
FOR ASSEMBLY VIDEO PLEASE VISIT
kdframes.com
Manufactured by
394 Dairy Pak Rd. • Athens, GA 30607
kdframes.com • [email protected]
NOMAD PLATFORM BED
KING
Instructions for the
SKU# 2875-NP-EK
