Introduction
Welcome to KBC Network’s Quick Start Guide for
the ESUG8P, 8 gigabit port, PoE switch. This
document provides some quick tips on how to
get up and running. For more detailed
information see the Downloads section below.
Features:
•
IEEE802.3at on 8 ports
•
Dual redundant power input
•
Alarm output for power supply
•
Full & half duplex operation
•
MDI/MDI-X
•
IP30 casing
Downloads
Installation manual
Other features and functions are described in the
unabridged manual:
http://www.kbcnetworks.com/esug8p-
series/network-products/esug8p-series
Specification sheets:
http://www.kbcnetworks.com/esug8p-
series/network-products/esug8p-series
System Contents
Qty Description
1
Ethernet switch fitted with DIN rail mount.
2
Wall-mount brackets with screws.
1
Pluggable terminal block.
Equipment Required for Physical
Deployment
You will need a 50 -57Vdc power supply, these
are supplied separately.
Quick Start Guide
ESUG8P-D*
Industrial Ethernet Switch
QSG_ESUG8P-D-Rev1112
www.kbcnetworks.com
Copyright © KBC Networks Ltd. 2011
