T
HE
U
LTIMATE
P
IVOT
F
AN
DT-700 SERIES
HT-700 SERIES
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1.
Use this fan only as described in this manual.
Other use not recommended may cause fire,
electric shock or injury to persons.
2.
This product is intended for household use
ONLY
and not for commercial, industrial or
outdoor use.
3.
To protect against electric shock, do not place
fan in window, immerse unit, plug or cord in
water or spray with liquids.
4.
This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
shock, this plug is intended to fit only one way
in a polarized outlet. If the plug does not fit
fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
DO NOT
attempt to defeat this safety feature.
5.
Close supervision is necessary when any
appliance is used by or near children.
6.
Turn the fan to the OFF position and unplug
the fan from the outlet when not in use, when
moving the fan from one location to another
and before cleaning.
7.
To disconnect the fan, first turn control to the
OFF
position, grip the plug and pull it from the
wall outlet. Never pull by the cord.
8.
Do not operate the fan in the presence of
explosive and/or flammable fumes.
9.
Do not place the fan or any parts near an open
flame, cooking or other heating appliance.
10.
Do not operate the fan with a damaged cord
or plug or if the product malfunctions, is
dropped or damaged in any manner (see
warranty).
11.
Avoid contact with moving fan parts.
12.
The use of attachments not recommended by
the manufacturer may be hazardous.
13.
Place the fan on a dry level surface.
14.
Turn the fan OFF and unplug it before
removing the fan grille. Do not plug in or
operate the fan if the grille is removed or
not properly assembled.
15.
Do not operate if the fan housing is removed
or damaged.
16.
A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Fan With Any
Solid-State Speed Control Device.
DT-700_HT-700_OM.qxd 11/2/05 11:45 AM Page 1
