Kaysun KID-02 S, User Manual

Page: 8 / 80

User manual KID-02 S
6
“DOWN” Button
: P Push this button to decrease the indoor temperature setting in 1oC
increments to 17ºC.
9-
SILENCE/FP Button
Active/Disable SILENCE function. If pushing more than 2 seconds, the FP function will be
activated, pushing more than 2 seconds again to disable.
When the Silence function is activated, the compressor will operate at low frequency and the
indoor unit will bring faint breeze, which will reduce the noise to the lowest level and create a
quiet and comfortable room for you. Due to low frequency operation of compressor, it may result
in insufficient cooling and heating capacity.
The FP function can only be activated during the heating operation(only when the setting mode is
HEAT). The unit will operate at a setting temperature of 8ºC.The display window of indoor unit will
display FP .Press the buttons of ON/OFF, SLEEP, FP, MODE, FAN SPEED,UP or DOWN while
operating will cancel the FP function.
10-
“TIMER ON” Button
: Press this button to initiate the auto-on time sequence. Each press
will increase the auto-timed setting in 30 minutes increments. When the setting time displays
10H, each press will increase the auto-timed setting 60 minutes increments. To cancel the
auto-timed program, simply adjust the auto-on time to 0:0.
11-
“TIMER OFF” Button
:
Press this button to initiate the auto-off time sequence. Each press
will increase the auto-timed setting in 30 minutes increments. When the setting time displays
10H, each press will increase the auto-timed setting 60 minutes increments. To cancel the
auto-timed program, simply adjust the auto-off time to 0:0.
12-
Swing Button
: Used to stop or start horizontal louver auto swing feature.
DIRECT Button: Used
to change the louver movement and set the desired up/down air
flow direction. The louver changes 6O in angle for each press
13-
“FOLLOW ME” Button
:
Push this button to initiate the Follow Me feature, the remote
display is actual temperature at its location. The remote control will send this signal to the air
conditioner every 3 minutes interval until press the Follow Me button again. The air
conditioner will cancel the Follow Me feature automatically if it does not receive the signal
during any 7 minutes interval.
14-
“LED” Button
:
Disable/Active indoor screen Display. When pushing the button, the indoor
screen display is cleared, press it again to light the display.