2 0 H a M e s i l a S t . , N e s h e r 3 6 8 8 5 2 0 , I s r a e l
P O B 2 5 0 0 4 , H a i f a 3 1 2 5 0 0 1 , I s r a e l
T e l : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 0 0 F a x : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 1 1
Page no. 22 | Configuration Interface
Steps to set Auto Exposure Mode:
1.
Define Desired Brightness Level.
Figure 16 – Brightness level
2.
Define Auto Exposure Minimum and Maximum Time. These parameters define the limits for exposure
time adjustment. By default, these values will be set to maximum and minimum possible values.
Figure 17 – Auto exposure times
3.
Choose one of Auto Exposure modes: “Once” or “Continuous”. Under “Once” mode, the algorithm will
adjust the Exposure only once and then the feature will be set to OFF. Respectively under “Continuous”
mode, the exposure will be adjusted continuously.
Figure 18 – Exposure mode
