Kaya Instruments JetCam, User Manual

Page: 21 / 58

2 0 H a M e s i l a S t . , N e s h e r 3 6 8 8 5 2 0 , I s r a e l
P O B 2 5 0 0 4 , H a i f a 3 1 2 5 0 0 1 , I s r a e l
T e l : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 0 0 F a x : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 1 1
www.kayainstruments.com Page no. 18 | Configuration Interface
7.2 Image Format Control
The Image Format Control is responsible for defining the output image dimensions and format type. The resolution
of the image and output format will influence the maximum frame rate, which can be achieved.
Figure 14 – Image Format Control category in GenICam Browser
7.2.1 Image Format Control XML Parameters
Parameter Description Gen<i>Cam name Type Possible values
Remarks
Value Gen<i>Cam name
Gen<i>Cam Category: ExtendedStreamFeatures \ ImageFormatControl
Sensor Width Effective width of the sensor
in pixels SensorWidth Integer In pixels
See remark (1)
Sensor Height Effective height of the sensor
in pixels SensorHeight Integer In pixels
See remark (1)
Width Width of the image provided
by the device (in pixels) Width Integer
≥ 4
Height Height of the image provided
by the device (in pixels) Height Integer
≥ (*)
*Minimum value is
dependent on sensor
type, pixel bitness and
acquisition mode
Offset X Horizontal offset from the
origin to the area of interest
(in pixels) OffsetX Integer
Offset Y Vertical offset from the origin
to the area of interest (in
pixels) OffsetY Integer
Pixel Format Indicates the format of the
pixel to use during the
acquisition PixelFormat Enumeration 0x00000101 Mono8 See remark (2)
0x00000102 Mono10
0x00000103 Mono12
0x00000311 BayerGR8
0x00000312 BayerGR10
0x00000313 BayerGR12
0x00000321 BayerRG8
0x00000322 BayerRG10
0x00000323 BayerRG12
0x00000331 BayerGB8