110
SY
ST
EM
M
enu
SYSTEM Menu Parameters & Functions
3
MIDI
1. System Channel
value
: 01
cH
~ 16
cH
This parameter determines the System MIDI channel used to
receive MIDI messages when Receive Mode is set to Panel.
* The default setting is 01Ch
.
2. Key to MIDI
o
n
, o
ff
This parameter determines whether or not keyboard events are
transmitted via MIDI OUT.
* The default setting is ON.
3. Key to USB
o
n
, o
ff
This parameter determines whether or not keyboard events are
transmitted via USB-MIDI.
* The default setting is ON.
4. MIDI to MIDI
o
n
, o
ff
This parameter determines whether or not received MIDI IN
events are transmitted via MIDI OUT.
* The default setting is OFF.
5. MIDI to USB
o
n
, o
ff
This parameter determines whether or not received MIDI IN
events are transmitted via USB-MIDI.
* The default setting is OFF.
6. USB to MIDI
o
n
, o
ff
This parameter determines whether or not received USB-MIDI
events are transmitted via MIDI OUT.
* The default setting is OFF.
7. SETUP Program
o
n
, o
ff
This parameter determines whether or not the Send Program
parameter in the EDIT menu (MIDI OUT/SETUP) is enabled.
* For more information about the Send Program parameter, please refer to
* The default setting is OFF.
8. SETUP Bank
o
n
, o
ff
This parameter determines whether or not the Send Bank
parameter in the EDIT menu (MIDI OUT/SETUP) is enabled.
* For more information about the Send Bank parameter, please refer to
* The default setting is OFF.
9. SETUP Volume
o
n
, o
ff
This parameter determines whether or not the Send Volume
parameter in the EDIT menu (MIDI OUT/SETUP) is enabled.
* For more information about the Send Volume parameter, please refer to page 56.
* The default setting is OFF.
10. SETUP Knobs
o
n
, o
ff
This parameter determines whether or not the Send Knobs
parameter in the EDIT menu (MIDI OUT/SETUP) is enabled.
* For more information about the Send Knobs parameter, please refer to page 56.
* The default setting is OFF.
11. Receive Mode
p
anel
, m
ulti
, o
mni
o
n
This parameter determines how the MP7SE receives MIDI data.
Mode
Description
Panel
Only data received from the designated system channel
will be sent to the MAIN, SUB1, SUB2, and SUB3 zones.
* With this setting, layer and internal effects will be available.
Multi
Data received from all MIDI channels (ch1~ch16) will be
sent to the MAIN and SUB1, SUB2, SUB3 zones or MIDI
channels.
* With this setting, an additional set of pages will appear,
allowing MIDI Receive Channels to be specified.
Omni On
Received data controls the whole panel, regardless of
the MIDI channel.
* The default setting is Panel
.
12. Program Change Mode
p
anel
, gm
This parameter determines the sound numbering format that is
used when sending MIDI Program Change information.
Mode
Description
Panel
Program Change data is sent in accordance with the
instrument’s panel button numbering format.
GM
Program Change data is sent in accordance with the
standard GM numbering format.
* Select this setting when connecting the MP7SE to GM devices.
* The default setting is Panel
.
13. Receive Channel
o
n
, o
ff
,
m
ain
, s
ub
1, s
ub
2, s
ub
3
When Receive Mode is set to ‘Multi’, these additional settings
determine whether the Receive Channel is turned ON or OFF, or
assigned to a specific zone.
* When set to MAIN, SUB1, SUB2, or SUB3, the MIDI input signal will still
trigger sounds even when the zone is turned OFF.