42
ED
IT
M
en
u
EDIT Menu parameters
(PIANO, E.PIANO, SUB)
3
Sound
1. Master Volume
value
: 0 ~ 127
This parameter adjusts the total SETUP volume. This parameter
is used to adjust the balance among each stored SETUPs (page
61).
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
2. Panpot
value
: l64 ~ r63
This parameter adjusts the left/right position of the selected
sound within the stereo field.
3. Filter Cut-off
value
: –64 ~ +63
This parameter adjusts the frequency of the cut-off. Raising
the cut-off level increases the brightness of the sound, while
lowering the cut-off level results in a duller sound.
4. Filter Resonance
value
: –64 ~ +63
This parameter adjusts the amount of the harmonic overtone
around the cut-off frequency for the selected sound.
5. DCA Attack Time
value
: –64 ~ +63
This parameter adjusts the length of the attack. Higher values
increase the attack time, resulting in a longer, slower attack for
the selected sound.
6. DCA Decay Time
value
: –64 ~ +63
This parameter adjusts the length of the decay from peak level
to sustain level for the selected sound.
7. DCA Sustain Level
value
: –64 ~ +63
This parameter adjusts the volume level of the sustain heard
while the key is held for the selected sound.
8. DCA Release Time
value
: –64 ~ +63
This parameter adjusts the amount of time required for the
sound to fade out after the keys are released for the selected
sound.
9. DCF Attack Time
value
: –64 ~ +63
This parameter adjusts the length of the filter’s attack. Higher
values increase the attack time, resulting in a longer, slower
attack for the filter.
10. DCF Attack Level
value
: –64 ~ +63
This parameter adjusts the level of the filter’s attack.
11. DCF Decay Time
value
: –64 ~ +63
This parameter adjusts the length of the decay from peak level
to sustain level for the filter.
12. DCF Sustain Level
value
: –64 ~ +63
This parameter adjusts the level of the filter’s sustain heard
while the key is held for the selected sound.
13. DCF Release Time
value
: –64 ~ +63
This parameter adjusts the amount of time required for the filter
to fade out after the keys are released.
14. DCF Touch Depth
value
: –64 ~ +63
This parameter adjusts how much the velocity affects the filter
envelope depth.
15. DCA Touch Depth
value
: –64 ~ +63
This parameter adjusts how much the velocity affects the
amplitude envelope depth.
