40
ED
IT
M
en
u
EDIT Menu parameters
(PIANO, E.PIANO, SUB)
1
Reverb
1. Type
6
types
This parameter selects the reverb type.
* For more information about reverb, please refer to page 22.
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
2. Pre Delay
value
: 0 ~ 200
ms
This parameter adjusts the delay time before the start of the
reverberation.
* For more information about reverb, please refer to page 22.
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
3. Time
value
: 300
ms
~ 10.0
s
This parameter adjusts the reverb time.
* For more information about reverb, please refer to page 22.
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
4. Depth
value
: 0 ~ 127
This parameter adjusts the reverb depth.
* For more information about reverb, please refer to page 22.
2
.1 EFX
1. Category
23
categories
This parameter selects the effect category.
* For more information about effects, please refer to page 23.
* The E.PIANO section lists two pages for EFX1 and EFX2.
2. Type
129
types
This parameter selects the effect type.
* For more information about effects, please refer to page 23.
* The E.PIANO section lists two pages for EFX1 and EFX2.
3. Parameters
n
/
a
These parameters change depending on the selected EFX type,
and are used to adjust the mixing amount of the effected (wet)
and bypassed (dry) sound, depth, speed, feedback, etc.
* For more information about effects, please refer to page 23.
