４
２．
Strike Point, Keyframe Position
Hammer No. 88 should strike the string 2.16mm
- 3.0mm from the capo bar. The final location
should be chosen by the sound.
To move the action forward glue a shim (thin wood
veneer) onto the hard wood block at the back side of
the Keyframe. To move the action back, file the
wood block. After the block is set correctly, then
adjust the keyframe guides in the cheek blocks to
match.
If most hammers are aligned towards the left from
strings, glue a shim (wood veneer or thick paper) to
the back side of Action Block.
