112
S
ettings
Virtual Technician
9
Fall-back Noise
When playing an acoustic piano, it is often possible to hear the faint sound of the keyboard action returning (i.e.
‘falling back’) to the neutral position after a key is released.
The CA98/CA78 digital piano reproduces this sound, with the Fall-back Noise setting allowing the volume of this
sound to be adjusted.
While the default value is intended to simulate the natural volume level of the keys as they return to their neutral
position, it may occasionally be desirable to adjust the volume of this sound. For example, reducing the volume
when playing very soft pieces, where the fall-back noise may become too prominent.
* This Virtual T
echnician setting will affect acoustic piano and harpsichord sounds.
Adjusting the Fall-back Noise volume
Long press and drag the slider to increase or decrease the
volume of the Fall-back Noise setting.
* The Fall-back Noise volume can be adjusted within the range of Off,
1~10, with higher values resulting in a more pronounced noise.
* Any changes made to the Fall-back Noise setting will remain until the
power is turned off.
* Preferred Fall-back Noise settings can be stored to the sound’s memory
(in Sound mode) or a Favorite memory for convenient recall. Please
refer to pages 83 and 102 for more information.
Pianist Mode
Sound Mode
Fall-back Noise slider
