Kawai ANYTIMEX3, Owner'S Manual

Page: 138 / 166

138
Settings
Settings
8
. Send Program Change Number
The Send Program Change Number function is used to send a Program Change Number (1-128) to the connected
MIDI device.
„ „
Sending the Program Change Number
1. Swipe up/down or tap the arrow buttons above and below
each digit to set the Program Change Number.
* The program change number can be set within the range of 1~128.
2. Tap the [Send] button to send the specified Program Change
Number.
9
. Local Control
The Local Control setting determines whether this instrument will play an internal sound when the keys are pressed.
This setting may be useful when using this instrument to control an external MIDI device that is connected to the
instrument’s amplifier/speakers.
„ „
Local Control setting
Local Control Description
Off This instrument will transmit information to an external MIDI device only.
On
(default)
This instrument will play an internal sound and transmit information to an external MIDI device.
„ „
Changing the Local Control setting
Tap the [ON/OFF] buttons to turn Local Control on/off.
* Any changes made to the Local Control setting will remain until the
power is turned off.
* Preferred Local Control settings can be stored to a Favorite memory for
convenient recall. For more information, please refer to “1. Storing and
Selecting Favorite memories” on page 79.
Program Change Number
Send button
Local Control
ON/OFF buttons