manualshive.com logo in svg

KaVo SURGmatic S201 XL Pro, Instructions For Use Manual, Page: 18 / 28

Share
Download
KaVo SURGmatic S201 XL Pro Instructions For Use Manual Download Page 18

Instructions for use SURGmatic S201 XL Pro - 1.013.7541 SURGmatic S201 L Pro - 1.013.7540

7 Processing steps in accordance with EN ISO 17664 | 7.3 Manual processing

18 / 28

7.3 Manual processing

 WARNING

Sharp tool in the medical device.

Injury hazard from sharp and/or pointed tool.

▶

Remove the tool.

NOTICE

Never process this medical device in an ultrasonic device.

Functional damage and property damage.

▶

Clean it in a washer disinfector only.

Note

The spray clip for internal cooling may be additionally cleaned in the ultra-
sonic cleaner.

7.3.1 Manual internal and external cleaning and internal
and external disinfection

Not applicable.

7.3.2 Manual drying

▶

Clean the outside and inside with compressed air until no drops of water are
visible.

▶

Immediately after drying, lubricate the KaVo medical device with care
agents from the KaVo care system.

See also:

2

7.5 Care products and systems - Servicing, Page 20

7.4 Automated processing

 WARNING

Incomplete disinfection.

Infection hazard.

▶

Only use disinfection procedures that are verified to be bactericidal, fungici-
dal and virucidal.

▶

If the disinfectants used do not meet these requirements, the process must
be concluded by disinfection of the unit(s) without packaging using a steril-
izer.

Summary of Contents for SURGmatic S201 XL Pro





























Reviews:

No comments