Instructions for use SURGmatic S201 XL Pro - 1.013.7541 SURGmatic S201 L Pro - 1.013.7540
5 Operation | 5.6 Removing the bur or diamond
WARNING
Use of unauthorized burs.
Injury to the patient or damage to the medical device.
▶
Comply with the instructions for use and the intended use of the bur.
▶
Only use burs that do not deviate from the specified data.
CAUTION
Injury from using worn burs.
Burs could fall out during treatment and injure the patient.
▶
Never use burs with worn shafts.
CAUTION
Danger of injury from bur.
Infections or cuts.
▶
Wear gloves or finger guards.
CAUTION
Hazard from defective chucking system.
The bur could fall out and cause injury.
▶
Pull on the bur to make sure that the chucking system works properly and
that the bur is held securely. Wear gloves or finger guards when you check,
insert or remove the insert to prevent injury and infection.
▶
Insert the bur into the segment of the head drive by twisting the tool
slightly, and push it to the bur stop. Activate the button if necessary.
▶
Make sure that the tool is seated securely by pulling on it.
5.6 Removing the bur or diamond
WARNING
Hazard from rotating bur.
Lacerations and damage to the chuck system.
▶
Do not touch the bur while it is rotating!
▶
Never press the push-button while the bur is rotating!
▶
Remove the bur from the contra-angle handpiece after treatment to avoid
injury and infection when putting it away.
▶
After the bur or diamond has stopped rotating, firmly press the button with
your thumb and simultaneously pull out the bur or diamond.
15 / 28