6 Using the device
16.
Acknowledge the preview by pressing the
OK
button.
17.
Continue to take the next image, if multiple images need to be taken.
18.
Release the patient from the device.
19.
Remove all disposable covers and decontaminate the device and the patient positioning
accessories.
6.5.3
Taking Dental cast images
NOTICE!
You can take a Scout image of the dental cast before the actual 3D
image by activating the Scout selection from the GUI.
1.
Attach Chin rest to the lower shelf of the device.
2.
Attach the Dental cast holder over the Chin rest.
3.
Place the dental cast on the holder as shown on the GUI.
4.
Protect yourself from radiation.
5.
Press and hold the exposure button down.
6.
The device starts to move and an audible exposure warning signal is played.
7.
Hold the exposure button down until all movements have stopped.
NOTICE!
The device also plays a program end tone when the imaging process is complete.
8.
A preview image appears on the GUI for a quick review (no visible artifacts etc.).
9.
Acknowledge the preview by pressing the
OK
button.
ORTHOPANTOMOGRAPH
™
OP 3D
69
