Instructions for use KEY Laser III 1243
4 Operation
|
4.14 Changing a program setting
4.14 Changing a program setting
When the Parameter key is pressed in the program selection menu, the parameter
menu appears.
Here, it is possible to change the settings for the currently active program. The active
program with the preset handpiece appears in the selection list in the start menu, in
the parameter menu with bright background and dark characters.
The changes can be saved under the existing program name by pressing the OK
key.
To save the changes with a new name, use the save key to save it as a new program.
See also: 4.16 New program, Page 64
The AIR and WATER keys act as on/off switches. Active keys have a bright back‐
ground with dark inscription. DETECT and FEEDBACK are mutually exclusive.
4.14.1 Reset new settings
To reverse the changes in the program settings, press the program reset key in the
system menu.
See also: 4.12 System menu, Page 57
4.14.2 Pilot jet setting
The intensity of the pilot laser can be adjusted by pressing the arrow keys. The
highest value corresponds to the highest possible intensity.
61/99
Summary of Contents for KEY Laser III 1243
Page 1: ...Instructions for use KEY Laser III 1243 Always be on the safe side...
Page 102: ......
Page 103: ...1 001 1452 kb 20080813 07 en...
