1.3
Important instructions
Note
The instructions fur use must be read by the user before start-up to prevent im‐
proper use and damage.
It is possible that the product may be modified or improved on the basis of new
technical developments. An entitlement to update the product does not follow.
KaVo cannot accept responsibility for damage caused by:
▪ External factors beyond its control (poor media quality or defective installation)
▪ The use of incorrect information,
▪ Improper use,
▪ Improper installation, startup and repairs.
The KEY Laser 3+ / III upgraded may only be installed, repaired and serviced by
technicians who have successfully passed KEY Laser 3+ / III upgraded training.
Permits become void upon non-observance.
Note
only original KaVo replacement parts may be used.
Note
The device may not be altered without the manufacturer's permission.
Note
Additional steps for installation or startup as well as service of the KEY Laser 3+ /
III upgraded must be performed by a technician trained by KaVo. These steps are
described in training documents. The technician obtains these after successfully
completing training for the KEY Laser 3+ / III upgraded.
1.3.1
Registration
The operator in the Federal Republic of Germany is required to register the KEY
Laser 3+ / III upgraded before first to start up at:
▪ the responsible trade board
▪ the responsible Employee Liability Insurance
The respective national regulations regarding operation must be observed in other
countries.
1.4
Packages
1.4.1
Weight and IDs
See also: 3.5 Technical data and requirements, Page 27
Instructions for use KEY Laser 3+ 1343 KEY Laser III 1243 upgraded
1 User instructions | 1.3 Important instructions
7/76
