KaVo KEY Laser 3+ 1343 Instructions For Use Manual Download Page 51

Page: 51 / 80

Press the Stop key to return to the start menu without accepting the selected pro‐

gram.

4.13.3

Delete program

The predefined programs cannot be deleted. Only programs defined by the user

can be deleted.

4.14

Program settings

The Parameters menu appears by pressing the Parameters key in the Program

selection menu

Here you can change settings for the active programme. The active program with

the preset handpiece appears in the start menu in the selection list, and it appears

in the Parameters menu with a bright background and dark text.

The changes can be saved by pressing the the OK key under the existing program

name.

If you want to save the changes under a new name, you have to save them in a new

program by using the Safe key.

The AIR, WATER, DETECT and FEEDBACK keys function as on/off switches. The

active keys have a bright background with dark text. DETECT and FEEDBACK are

mutually exclusive.

Instructions for use KEY Laser 3+ 1343 KEY Laser III 1243 upgraded
4 Operation | 4.14 Program settings

49/76

Summary of Contents for KEY Laser 3+ 1343

















































































Search results

Summary of Contents for KEY Laser 3+ 1343

Reviews:

Related manuals for KEY Laser 3+ 1343

Brands by name

Popular brands

KaVo KEY Laser 3+ 1343, Instructions For Use Manual

Search results

Summary of Contents for KEY Laser 3+ 1343

Reviews:

Related manuals for KEY Laser 3+ 1343

Brands by name

Popular brands