KaVo K-Control TLC 4955, Instructions For Use Manual

Page: 19 / 36

Instructions for use K-Control TLC 4955, 4956, 4957
4 First use | 4.1 Combined control/handpiece
4 First use
Note
Prior to start-up, very cold products must be heated to a temperature of
Heat to 20
o
C to 25
o
C. Avoid condensation.
Note
Do not switch the handpiece on while the chuck is open!
Note
Do not cover the air vent.
4.1 Combined control/handpiece
The following handpieces can be used in conjunction with the K-Control TLC 4955,
4956 and 4957 controls:
▪ K-POWERgrip 4941
▪ K5plus 4911
▪ K5 4910
▪ K9 4930
▪ K9 miniature motor 970
▪ K9 milling spindle 960
▪ K11 4990
▪ K12 4940
▪ K-ERGOgrip 4944
19 / 36