KaVo GENTLEmini LUX 4500 BR Instructions For Use Manual Download Page 52

Page: 52 / 80

7.2.2 Automated external cleaning

KaVo recommends thermodisinfectors in accordance with ISO 15883-1,

which are operated with alkaline cleaning agents with a pH value of max.

10 (e.g. Miele G 7781/G 7881 – Validation was carried out with pro‐

gramme "VARIO-TD", cleaning agent "neodisher® mediclean", neutralisa‐

tion agent "neodisher® Z" and rinsing agent "neodisher® mielclear" and

only applies to the compatibility of materials with KaVo products).

▶ For program settings as well as cleansers and disinfectants to be

used, please refer to the Instructions for Use of the thermodisinfector

(complying with max. pH value of 10).

▶ In order to prevent negative effects on the medical device, make sure

that the interior and the exterior of the medical device are dry after

completion of the cycle, and then grease it immediately with servicing

agents from the KaVo care system.

7 Preparation methods according to ISO 17664

52 / 78

Summary of Contents for GENTLEmini LUX 4500 BR

















































































Search results

Summary of Contents for GENTLEmini LUX 4500 BR

Reviews:

Related manuals for GENTLEmini LUX 4500 BR

Brands by name

Popular brands

KaVo GENTLEmini LUX 4500 BR, Instructions For Use Manual

Search results

Summary of Contents for GENTLEmini LUX 4500 BR

Reviews:

Related manuals for GENTLEmini LUX 4500 BR

Brands by name

Popular brands