KaVo EXPERTtorque Mini E677, Instructions For Use Manual

Page: 12 / 26

Instructions for use EXPERTtorque E680 - 1.006.4700EXPERTtorque Mini E677 - 1.006.0100
5 Operation | 5.1 Attaching the medical device
12 / 26
5 Operation
Note
At the beginning of each workday, the water-conducting systems should be
rinsed for at least 2 minutes (without transmission handpieces being at-
tached) and if there is a risk of contamination from reflux or back suction, the
system may also need to be rinsed for 20-30 seconds after each patient.
5.1 Attaching the medical device
WARNING
Detachment of the medical device during treatment.
A medical device that is not properly locked can detach from the coupling dur-
ing treatment.
▶ Before each use, pull on the medical device to make sure that it is securely
locked onto the coupling.
NOTICE
Inaccurate coupling can destroy the high-pressure lamp or the LED of the cou-
pling or reduce its service life.
▶ Make sure that the high-speed air handpiece is accurately coupled and
firmly seated on the coupling.
▶ Accurately attach the medical device to the coupling and push is to the rear
until the coupling audibly locks in the medical device.
▶ Pull on the medical device to make sure that it is securely affixed to the
coupling.
5.2 Removing the medical device
▶ Firmly grasp the coupling and pull the medical device off while twisting
slightly.
5.3 Inserting the bur or diamond
Note
Only use carbide burs or diamonds that comply with ISO 1797-1 type 3, are
made of steel or hard metal and meet the following criteria:
- Shaft diameter: 1.59 to 1.60 mm
- Overall length: EXPERTtorque: max. 25 mm
- Overall length: EXPERTtorque Mini: max. 19 mm
- Shaft clamping length: EXPERTtorque: min. 11 mm
- Shaft clamping length: EXPERTtorque Mini: min. 9 mm
- Blade diameter: max. 2 mm
WARNING
Use recommended dental burs or diamonds only.
Risk of injury.
▶
Comply with the instructions for use and the intended use of the bur.