Instructions for use EXPERTsurg LUX – 1.008.3500
5 Operation | 5.5 Changing default values
41 / 68
4
Press the arrow keys until the coolant display is highlighted.
4
Press the plus and minus keys to set the desired value. The step width de-
pends on the transmission ratio and the range of values.
ð
Changed values are stored automatically.
The coolant flow can be set and switched on or off during the treatment using
the pump key of the foot control. The pump key has two operating modes.
Also refer to:
5.2 Making the device settings, Page 30
The changed value is shown on the display and is then available for the next
use.
Also refer to:
5.5.4 Changing the direction of motor rotation
4
Press the arrow keys until the display of the direction of motor rotation is
highlighted.
