KaVo EXPERTmatic E31 C, Instructions For Use Manual, Page: 10 / 28

Instructions for use EXPERTmatic E31 C – 1.008.4998
3 Description of the product | 3.1 Intended use
10 / 28
3 Description of the product
EXPERTmatic Contra-angle handpiece E31 C ( Mat. no. 1.008.4998 )
3.1 Intended use
Indications for use:
This medical device is:
▪ Intended for dental treatment only. All other types of use of or modifications
to the product are not permitted and can be hazardous.
▪ The medical device can be used in combination with a polishing tool to sup-
port the periodontopathy by polishing with a rotating tool.
▪ A medical device according to relevant national statutory regulations.
Proper use:
According to these regulations, this product may only be used for the described
application by a properly trained user. You need to comply with the following:
▪ the applicable health and safety regulations
▪ the applicable accident prevention regulations
▪ these Instructions for use
According to these regulations, the user is required:
▪ exclusive use of equipment that is operating correctly.
▪ compliance with the specified intended use.
▪ Protect themselves, patients and third parties from danger.
▪ Contamination by the product must be avoided.
3.2 Technical specifications E31 C (without light)
Drive speed max. 10,000 rpm
-1
Speed transmission 5.4 : 1
Identification 1 green ring
Cooling air flow 5.5 to 9.5 Nl/min
Insert Prophy cups and polishing brushes or
supports with Snap-On function in ac-
cordance with DIN EN ISO 13295,
support type 5
Can be attached to All INTRA (LUX) motors and motors
with a connector in accordance with
DIN EN ISO 3964