KaVo ESTETICA E70 Vision, Instructions For Use Manual

Page: 96 / 178

Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.11 Using the functions through the assistant unit controls
96 / 178
Key Function
Bowl flushing
The bowl is being rinsed. The flushing time can be
changed.
When the rinsing position (SP) is reached, the bowl
is rinsed for the complete rinsing time, i.e., the bowl
is being wetted.
Leaving the rinsing position (SP), the bowl is rinsed
for the full rinsing time. (The function can be deac-
tivated by a service technician).
▶
To activate a function, press the button.
▶ Press the button again to terminate the function.
4.11.3 Using the light functions
The following keys are available for use of the light functions:
Key Function
press briefly:
The operating light is turned on and off
▪ Operating light On: Key is active
▪ Operating light Off: Key is inactive
press long until the Settings menu is displayed on
the dentist element:
The brightness of the operating light can be set to
one of five levels.
press briefly:
COMPOsave mode (dimmed normal light) of the op-
erating light switches on/off.
▪ COMPOsave mode On: Key is active
▪ COMPOsave mode Off: Key is inactive
press long until the Settings menu is displayed on
the dentist element:
▪ When the COMPOsave mode is set, the bright-
ness for the COMPOsave mode can be set to one
of five levels
▪ When Dim mode is set, the brightness for the
Dim mode can be set to one of five levels
Press down both keys together
Switch laser mode on/off.
4.11.4 Using the timer
Three timers can be opened. The timers are set on the dentist controls.
Select the timer time
▶
To start a timer time, e.g. Timer 1, press the "Timer 1" key.
ð
Time on the timer starts to run. A beep is issued after the timer time is
elapsed.
▶ Press the selection button again to stop the timer time.