Instructions for use ERGOcom 3
5 Operation
|
5.3 Operating ERGOcom 3 comfort/excellence
▶ Hold down the VGA OUT button for > 2 seconds.
The status display flashes and setting mode is activated.
▶ Use VGA OUT to select the required VGA input.
Note
If no entry is made within 8 seconds, the ERGOcom 3 returns to operating mode.
This saves the last setting on the status display.
5.3.5 Setting VIDEO OUT 1 image source
▶ Hold down the VIDEO OUT 1 button for < 2 seconds.
The last image source selected is shown in the status display. The status display
returns to operational mode after 5 seconds.
34/54
