Instructions for use ERGOcom 3
4 Start-up
|
4.3 Connect PC
4.3 Connect PC
Requirement
● Windows XP (SP 1) or Windows 2000 (SP4) must be installed on the PC. For
Windows XP, KaVo recommends SP2.
● The PC must have a free USB 2.0 interface.
▶ If you are using Windows XP (SP1), install Windows Patch.
Note
When installing the KaVo Device Interface System (using the enclosed CD), the
USB patch is installed automatically. Microsoft SP2 contains this patch.
If the KaVo Device Interface System is not installed, the USB patch can be installed
later from CD (D:\CCCDIS\install\OS) or downloaded and installed from the Mi‐
crosoft homepage www.microsoft.com .
▶ Insert the USB cable to the ERGOcom 3 and the PC.
The connection is made between the ERGOCOM3 USB drive and the PC.
The corresponding software components are listed in the PC device manager.
See also: 8.1 ERGOcom 3 device manager list, Page 51
19/54
