KaVo 3D eXam, Operator'S Manual

Page: 60 / 170

Kavo 3D eXam ® Operators’ Manual
k990400 September 19, 2007
7-14
To switch off the distance cursor:
1. Right click the image and select
Distance .
The cursor reverts to the default
cursor.
2. Measurements can be selectively
removed from a view as desired.
All measurements can also be
deactivated/reactivated for a view.
To remove a specific measurement:
1. Right-click the measurement to be removed and select Remove
Measurement .
Remove All Measurements - removes all measurements from
selected view.
Inactivate All Measurements - grays out all measurement
indicators and removes the measurements from the selected
view. When this is done, the
Reactivate All Measurements
becomes available.
Reactivate All Measurements - restores all of the inactivated
measurements to the selected view.
Rotating Views
The Sagittal, Coronal and/or Axial views can be rotated.
To rotate a view:
1. Hover the cursor over the lower right corner of the
desired view. The cursor changes to the rotation tool.