KaVo 3D eXam, Operator'S Manual

Page: 58 / 170

Kavo 3D eXam ® Operators’ Manual
k990400 September 19, 2007
7-12
To remove a specific measurement:
1. Right-click the measurement that is to be removed.
2. Select Remove Measurement from the popup menu.
Remove All Measurements - removes all measurements from
selected view.
Inactivate All Measurements - grays out all measurement
indicators and removes the measurements from the selected
view. When this is done, the
Reactivate All Measurements
becomes available.
Reactivate All Measurements - restores all of the inactivated
measurements to the selected view.
Distance
The system software allows making distance (linear) measurements
for all image views. These measurements calculate and display the
average (Mean) grayscale level of the area enclosed from -1000 to
3000 (where 0 equals the density of water). The Standard Deviation
is also calculated, where the smaller the number, the closer each
shade of gray is in density to the others in the enclosed area.
To make a linear (distance) measurement:
1. To make a measurement, right click image and select Distance .