Instructions for use SMARTmatic S10 REF 1.011.6730 SMARTmatic S10 K REF 1.011.6731 SMARTmatic S10 S REF
1.011.6732
5 Operation | 5.5 Modification for contra-angle burs
▶ Turn the taper sleeve back into its initial position.
5.5 Modification for contra-angle burs
Note
Using contra-angle burs, the handpiece must be converted.
▶ Open the handpiece chuck.
▶ Insert the enclosed bur stop in the chuck.
▶ Press the contra-angle bur onto the bur stop, close the clamping ring and make
sure that it is firmly seated.
▶ Use the enclosed hook to remove the bur stop.
15 / 30