Instructions for use MASTERmatic LUX M25 L - 1.009.3630, MASTERmatic LUX M05 L - 1.009.3640
3 Description of the product | 3.2 Technical Specifications
11 / 28
CAUTION
US Federal law restricts this device to sale by or on the order of a
health care professional / dentist.
For dental use only.
Proper use:
According to these regulations, this product may only be used for the described
application by a properly trained user. You need to comply with the following:
▪ the applicable health and safety regulations
▪ the applicable accident prevention regulations
▪ these Instructions for use
According to these regulations, the user is required:
▪ to only use equipment that is operating correctly
▪ to comply with the specified intended use
▪ to protect him or herself, the patient and third parties from hazards
▪ to prevent contamination from the product
3.2 Technical Specifications
Drive speed
max. 40,000 rpm
Speed transmission
1 : 5
Identification
1 red ring
Spray water pressure
0.8 to 2.0 bar (12 to 29 psi)
Spray air pressure
1.0 to 2.0 bar (15 to 29 psi)
Spray air flow rate
min. 1.5 Nl/min (at 2 bar)
Cooling air flow
5.5 to 9.5 Nl/min
Pushbutton chuck
Ø 1.6 mm
Insert
Dental burs and diamond grinders in
accordance with ISO 1797 type 3
Can be attached to
All INTRA (LUX) motors and motors
with a connector in accordance with
ISO 3964
3.3 Transportation and storage conditions
4
Do not store in a refrigerated environment.
Temperature: -20°C to +70°C (-4°F to +158°F)
Relative humidity: 5% RH to 95% RH absence of condensation
