CAUTION
Injury from improper use of carbide cutters or diamond grinders.
Never use metal cutters or grinders with worn shafts can fall out during treatment
and injure the patient.
▶ Never use cutters or burrs with worn shafts. Do not use tools that deviate
from the indicated data.
▶ Follow the manufacturer's instructions; only use the tool for the proper pur‐
pose!
CAUTION
Danger of injury from cutters or grinders.
Infections or cuts.
▶ Wear gloves or fingerstalls.
▶ Forcefully press the push button with your thumb and simultaneously insert
the cutter or grinder all the way.
▶ Check that the cutter or grinder is seated by pulling on it.
CAUTION
Hazard from defective chucking system.
The tool can fall out and cause injury.
▶ Pull on the tool to check if the chucking system is functioning properly and
that the tool is firmly clamped. Wear gloves or a thimble to check, insert, or
remove the bits to prevent injury and infection.
5.4
Removing the milling tool or diamond grinder
CAUTION
Danger from rotating tools.
Lacerations.
▶ Do not unintentionally contact rotating tools.
▶ After the cutter or grinder has stopped rotating, press the push button with
your thumb and pull out the cutter or grinder.
Instructions for use GENTLEsilence 8000BS - 1.000.5600
5 Operation | 5.4 Removing the milling tool or diamond grinder
10/19
