Kauo Heng KH-323 SERIES, Operation Manual

Page: 14 / 57

10. Carriage combination and separation
KH-323 series is equipped with two carriages, you can choose in use of
combination or separation by yourself for different knitting production.
Please operate combination or separation as follows
：
○
1
Turn off power.
○
2
Fig.10.1 is a top overview of carriages.
○
3
Loosen the four screws unconnected plate of driving belt, push the
connecting-block to the direction of carriage to pass, then take off
the connecting-block.
○
4
In separate situation , the interval of two knitting piece must be
minimum 180
㎜
.
（
Each 90
㎜
inactive area to left and right from
the central needle.
）
○
5
Move carriage to the marked position on belt, and replace the belt
fixed connecting-block.
○
6
Move the left orange relay which is on the back of driving belt as
follows.
In separation, the left relay should be on the central position.
In combination, the left relay should be on the side position.
Separation position
Combination position
Fig.10.1 Combination & separation carriage
1-11