50
The following display appears:
Press the
(green) button to move to the next menu.
Use the
buttons to select whether
to replace the factory pre-programmed
channel list by a pre-sorted channel list
for a speci
fi
c country (at present only
a limited number of pre-sorted channel
lists are available). If you prefer to use
the factory pre-programmed channel list,
choose “No” under “Restore Channellist”.
The following display appears:
Use the
buttons here to select the
basic settings for the video and audio
output from the receiver to the TV set.
For this, refer to the operating manual
for your TV set and take care to select
only those settings that your TV set can
process.
Video Output via
Select the connection on the receiver to which you have connected your television.
Either
HDMI Format
Here you can select the picture resolution that
will be sent to your TV set. Either
- 1080i (resolution 1920 x 1080, half-screen
images)
- 576p (resolution 720 x 576, full-screen images)
or
- 720p (resolution 1280 x 720, full-screen
images)
- automatically
TV Format
Here you can select the TV picture format. Either
- 4:3
or
- 16:9
HDMI
VIDEO
or
FIRST INSTALLATION
Note:
The better picture quality, in particular for HDTV signal is obtained via the HDMI port.
The precondition for this however is that your TV set has a HDMI port.
