LE80 Radio Receiver
Safety instructions | en
5
TeleAlarm
User Manual
LE80_UM_EN_V1.1_2021.12
1
Safety instructions
1.1
General safety instructions
Installation and initial operation should only be carried out
by trained service personnel.
1.2
Environmental conditions
The LE80 Radio Receiver must not be located near a water
tap or any other source of water. The electrical safety of the
LE80 Radio Receiver is only guaranteed if the electrical
installation is in accordance with the national regulations
and if this installation works properly. The LE80 Radio
Receiver may not be used in buildings prone to fire and
explosion hazards.
The LE80 Radio Receiver may not be used under exposure
to direct sunlight, to heat, to dust or to an excessive humidity
(only use the equipment in a clean environment).
Connect the power adapter in a power outlet near the unit.
Make sure that it remains easily accessible.
1.3
Electrostatic Discharge (ESD)
WARNING!
The LE80 Radio Receiver contains highly sensitive electronic
components. It should be opened only in an ESD protected
environment with respect to the following precautions.
Discharge yourself from electrostatic loads by touching a
grounded conductive surface before opening the unit. Avoid
touching conductive parts inside the LE80 Radio Receiver if
not absolutely necessary.