CORDLESS IMPACT DRIVER INSTRUCTION MANUAL
2
TOOL ASSEMBLY
INSTALLING THE BELT CLIP
Place provided belt clip (3) in the desired position
on the base of the impact driver. Using a Phillips
head #2 screwdriver, place screw through clip into
screw hole & hand tighten until you feel resistance
& clip is adequately tight.
The rating plate on your tool may show symbols. These represent important information about the product or
instructions on its use.
c)
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another
.
Shorting the battery terminals together may cause
burns or a fire.
d)
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help
.
Liquid
ejected from the battery may cause irritation or burns.
6) Service
a)
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is main-
tained.
Additional Safety Instructions impact driver
1)
Wear ear protectors when impact drilling. Exposure
to noise can cause hearing loss.
2)
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury
3)
Hold power tool by insulated griping surfaces, when
performing an operation the cutting accessory
may contact hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
SYMBOLS
Direct current, DC
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check
with your Local Authority or retailer for
recycling advice.
Refer to instruction manual/booklet
Wear ear protection
General warning
Wear eye protection
Regulator compliance mark
220010
