Katadyn Spectra Bimini 300, Installation And Operating Manual

Page: 20 / 88

20
The Bimini 300 has a power inlet harness with a terminal block and cover, a boost pump power
plug with a yellow band, terminal block for the tank full switch and the optional tank level sen-
sor, and a short plug with a green band for the optional Z - Ion.
Do not install it in hot or poorly ventilated locations. A llow access to the motor speed
control .
Power inlet harness
with terminal block
Boost pump cable (Yellow)
Brushless Motor speed
controller
Spectra Connect
controller (Inside control
Run Auto/Manual/Service
toggle switch
Electrical
Z - ION Connector (with green band). Left
unused if your system was not ordered
with the optional Z - ION.
Tank Full Switch
Terminal Block,
Green + Orange
Tank Level sensor
5vdc: Red
Signal: White
Ground: Black
Standard Fresh Water
Flush connector (Blue)
Product manifold assemble (Red -
connects left of Clark Pump)