Assembly Instruction Spool Valve
Power Survivor 40
Print. No. 8018461/1
1
Disassemble the Power Survivor according to
chapter “Seal Replacement” in the manual.
Silicon Grease
2
--
Prepare the spare parts and grease the
spool valve seals.
Spool valve
Housing
screw
Assembly
tool
3
Silicon
Grease
Borehole
Lightly grease the borehole before
inserting the spool valve.
4
Cone
Silicon
Grease
Place the assembly tool over the bore-
hole with the cone-shaped taper on top.
5
Press the spool valve by hand into
the borehole.
6
Use the screw as an extension to
press the spool valve completely
into the borehole.
7
The repair is complete when the spool
valve is entirely inside the housing.
