11
Filter Unit
The filter unit consists of a filter housing including fittings and framing, a filter cover
including a
vent valve, a filter housing gasket, 31 or 54 pieces of No. 5 filter elements, a cleaning hose, a
measuring gauge, a handheld cleaning device.
5.1
Setup Procedure
Take care that the filter unit is placed in a stable position and that the location surface is dry.
•
Remove the No. 5 filter elements from the package and
screw them hand-tight into the filter housing. Pay
particular attention that you do not tighten them too
much. Over tightening can damage the filters.
•
Close the filter housing and tighten the locking bolts
with a maximum of 17 Nm.
