KW55193 Wireless Router
User Manual
20
5.3 DHCP Settings
Choose menu “
Setup
→
Local Network
→
DHCP Server Settings
”, you can configure the DHCP
Server on the page as shown bellow.The Router is set up by default as a DHCP (Dynamic
Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s)
that are connected to the Router on the LAN.
DHCP Server:
Enable or Disable the DHCP server. If you disable the Server, you must have
another DHCP server within your network or else you must configure the computer
manually.
IP Poor Range:
Specify an IP address for the DHCP Server to start with when assigning IP
addresses. 192.168.1.2 is the default start address.
And
Specify an IP address for the DHCP
Server to end with when assigning IP addresses. 192.168.1.254 is the default end address.
Max Lease Time:
The Address Lease Time is the amount of time a network user will be
allowed connection to the Router with their current dynamic IP Address.
Enter the amount of time in minutes and the user will be "leased" this dynamic IP Address.
After the time is up, the user will be automatically assigned a new dynamic IP address.
Click the
Apply Changes
button to save
your settings.
