background image

2400 - 4400 VFX AERATOR MANUAL

12

Most failed equipment can be repaired at substantially lower costs than replacement with new. If your 

aerator requires repair and is no longer covered under warranty, please contact Kasco Marine or your local 

distributor for available options. Please ship according to the instructions on the previous provided. 

Kasco Marine does estimates on repairs at the request of the customer. The request for estimate should be 

included in the letter that accompanies the returned unit and must include a daytime phone number and/

or e-mail address. We will contact the customer with a total after the unit has been evaluated but before the 

work is performed.
All estimates that are rejected for repair will be destroyed unless otherwise directed by the customer. Re-

jected equipment can be returned at the customer’s expense for shipping and handling charges. 

Billing: All non-warranty repairs will be returned and billed to the customer unless otherwise directed. Kasco 

Marine accepts Visa and MasterCard credit card payments. Kasco Marine will call for credit card information 

upon completion of the estimate at the customer’s request.

Please see the Support section of 

kascomarine.com

 for more information about warranty and repairs. Con-

tact Kasco Marine at 715-262-4488 or [email protected] for additional information and your closest 

Authorized Repair Center.

NON-WARRANTY REPAIRS

715.262.4488

Kasco Marine

800 Deere Road
Prescott, WI 54021

kascomarine.com  |  [email protected]

CONTACT US

3020379

ANSI/UL 778: 2016

Ed.6+R:22Feb2017

CSA C22.2 #108: 201

4 Ed.5

Back to Contents

Summary of Contents for VFX















Reviews: