KARMETAL KMT 280 WOS, Operation Manual

Page: 4 / 89

4
WARRANTY CONDITIONS
The machine is under the warranty of
KARMETAL LTD. ŞTİ.
for a period of 2 years for
mechanical parts 1 year of electric and electronic parts from the date of purchase. This
warranty is subject to all of the terms and conditions listed below:
1. This warranty is valid only if the Warranty Registration Form is filled in and
returned to the manufacturer or its authorized dealer within two months after the
date of purchase.
2. The obligation of the manufacturer under this warranty shall be limited to repairing
or replacing components which proves defective and which our examination shall
disclose to our satisfaction to be defective.
3. Defects due to improper operation, misuse, neglect, alteration, irregular voltage
conditions, inadequate wiring, improper installation (all electrical and electronic
components, all electrical motors etc.) and due to accidents or any damage caused
by transportation, flood, fire, natural disasters, theft are not included in this
warranty and are strictly the responsibility of the purchaser.
4. Any part returned to KARMETAL or its authorized dealer under the terms of this
warranty shall be on the basis of transportation charges prepaid by the customer
and must be accompanied by a record of the machine model code and serial
number.
5. This warranty does not apply to the following components; band saw blade, blade
pressure pads or brackets and blade guide bearings because of being
consumables .
6. Manufacturer and authorized dealer cannot be blamed within maximum repair
period for the material or moral damage. Apart from that act the period as Warranty
Conditions and there will not be done any retroactive requirement.
KARMETAL SAN. & TIC. LTD. STI.
Dealer :