Karmann-Mobil DEXTER 560, Operating Manual

Page: 125 / 202

Fresh water system
EN 29
5.4 Starting up the fresh water system/using fresh water
Before fresh water can be drawn from the outlet points, it has to be ensured that the fresh water tank is
sufficiently full and that the fresh water pump is switched on at the control panel. (See item 7.13 “Control
panel” in section “Electrical system”.)
5.5 Fresh water pump
The fresh water pump (1) provides the required water pressure at the outlet points. It is switched on at
the control panel. It is located in a recess, next to the fresh water tank in the seat compartment of the
bench. A filter (2) that requires monthly cleaning is located next to the fresh water pump. The drain valve
(blue toggle – 3) for draining the fresh water tank is also located here.
Fresh water pump in the seat compartment of the bench (sample illustration)
Button for
switching on the
fresh water pump
Indicator light for
fresh water tank
fill level
Button for
switching on the
control panel
2
1
3