Karmann-Mobil DAVIS 540 2023, Operating Manual

Page: 165 / 377

Gas system
EN 41
WARNING
Risk of fire/explosion!
●
When connecting or changing the gas cylinder, do not smoke or allow any open
fire nearby!
●
Always keep the gas cylinder compartment closed.
6.5 Replacing a gas cylinder
To replace an (empty) gas cylinder, please proceed as follows:
●
Close the safety valve on the gas cylinder to be changed.
●
Close the gas shut-off valves (under the bench seat or in the left rear storage compartment)
●
Release the union nut on the connecting hose by turning it clockwise.
●
Release the straps on the strap attachments.
●
Remove the gas cylinder.
6.6 Leak detector spray for checking the tightness of the
gas cylinder
We recommend using a leak detector spray to check the leak tightness of the connected gas cylinder.
Every time a gas cylinder is connected or changed, spray the
leak detector spray onto the safety valve of
the gas cylinder, the connecting hose with the connecting points and onto the gas pressure regulator. Any
leaks resulting from emitted gas will then be indicated by bubbles forming.
Any areas identified in this way have to be remedied immediately.
WARNING
Explosion hazard!
●
Work on the gas system may be carried out only by a gas systems expert or an
authorised specialist workshop!
Checking the gas system
●
Have the gas system checked by an authorised specialist workshop every 2 years.
●
If any problems occur with the gas system, contact your authorised dealer or an
authorised specialist workshop.