
28
SEATS AND RESTRAINTS
To turn on a rear heated seat, press the
appropriate switch on the rear center
console switch pack.
WEARING THE SEAT BELT
FASTENING THE SEAT BELT
1.
Draw the belt out smoothly, ensuring
that the belt height, the seat position
and your position on the seat are
correct. The belt should lay flat across
the pelvis, chest and mid-point of the
collar bone between the neck and
shoulder
2.
With the belt correctly positioned, place
the metal tongue into the buckle
nearest to you. Press until a click is
heard
RELEASING THE BELT
To release the seat belt, press the red
button.
ADJUSTING THE HEIGHT OF THE
FRONT SHOULDER BELT
The height of the shoulder belt should be
adjusted so that the belt passes over the
center of your shoulder. The belt should be
away from your face and neck but not
falling off your shoulder.
To adjust the height of the shoulder belt,
press the adjustment button and move the
shoulder belt anchor to the desired
position. Release the button to lock the
anchor in position.
WARNING:
After adjustment,
release the adjustment button and
then try to move the anchor point up or
down to ensure it is locked into position.
Summary of Contents for REVERO
