Karma REVERO 2017, Owner'S Manual

Page: 114 / 168

113
WIPERS AND WASHERS
Wipers and Washers
CHECKING THE WIPER BLADES
Only use cleaning products which have
been approved for use on automotive glass
and rubber. Inappropriate products may
cause damage.
Periodically check and clean the wiping
edge of the wiper blade. Clean the blade
edge by wiping with a soft cloth or sponge,
using warm soapy water.
Also, check the blade rubber for cracks,
splits and roughness. If any damage is
found, replace the blade immediately to
prevent damage to the glass.
REPLACING THE WIPER BLADES
Replace the wiper blades if they are worn
or damaged. Damage can be caused by
extreme dusty conditions, sand, salt, heat,
sun, snow, and ice.
1.
Release the locking lever securing the
wiper blade to the wiper arm.
2.
Lift the wiper arm away from the
windshield.
3.
Squeeze the locking feature on the
blade to allow removal of the wiper
blade.
4.
Slide the wiper blade from the wiper
arm and remove.
To install the new blade, position the new
assembly on the wiper arm and close the
locking lever to retain the wiper blade.
Make sure the locking lever is securely
closed.
WASHERS
If a windshield washer becomes blocked,
use a thin strand of wire to clear any
blockages from the nozzle.
Note:
The headlamp washers operate with
every fifth operation of the windshield
washer. If you have any problems with the
headlamp washers, please consult a local
Karma Service Provider.