Instructions for use SOM 62/32/22 LED
11 SOM 62/32/22 LED EN 2017-03
7.2.2
Installation of swivel arm, suspension arm and microscope
Carry out the following installation steps as in Figure 4:
Undo the lock screw (2) on the upright guide cylinder (4) of the column (6)
Put on the swivel arm (1). Ensure in the process that the star knob (5) is undone.
Re-tighten the lock screw (2)
Screw the threaded pin (3) all the way into the threaded hole of the lock screw, and
tighten it
Carry out the remaining steps as in 7.1.2
Figure 4
WARNING
Ensure at all times that the lock screw (2) is screwed in all the way
and that the threaded pin (3) is
tightened
. It must not be possible
for the lock screw (2) to become loose. Only the fixing and
installation materials supplied may be used.
