Instructions – 40669SH
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 8
Step 7 – Installing Partition to Floor
Using four 1/4" x 1-1/4” hex
head bolts, 1/4" lock
washers, 1/4" flat washers,
and 3/8” nylon spacers, bolt
partition to installed plus
nuts. Spacers are optional,
but be sure to place under
partition and bolt through
3/8” nylon spacer to bridge
gaps between partition and
floor, as necessary.
Snug tighten but allow
movement.
Step 8 – Install Partition to B-pillar
Using 1/4” x 1-1/4” hex head bolts,
1/4” lock washers and 1/4" flat
washers, bolt partition with wings to
plus nuts installed in B-pillars.
GO BACK AND ENSURE ALL
HARDWARE IS
TIGHTENED.
ASSEMBLY AND
INSTALLATION ARE
COMPLETE.
PASSENGER SIDE SHOWN
HERE