Kärcher Puzzi 8/1, Instruction Manual

Page: 11 / 36

English 11
For further information, please request
the product information sheet and the
EU safety data sheet for the relevant
cleaning agent.
Transport
몇
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
1. Wind the mains cable around the
carrying handle of the device and
the cover. Place the spray/suction
hose in the hook. Insert the uphol-
stery nozzle into the accessory hold-
er.
Illustration D
2. When transporting the device in ve-
hicles, secure it to prevent it from
slipping or overturning in accord-
ance with the respective valid guide-
lines.
Storage
몇
CAUTION
Risk of injury and damage!
The device may tip over on sloping sur-
faces.
Be aware of the weight of the device
during storage.
The device may only be operated in-
doors.
Care and service

DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
Clean the fluff filter
1. Remove the cover.
2. Remove the wastewater container
from the device.
3. Pull out the fluff filter.
4. Regularly clean the fluff filter under
running water. If very dirty, open the
frame and replace the fleece.
Clean the fresh water filter
1. Unscrew the fresh water filter.
2. Clean the fresh water filter under
running water.
Clean the nozzle
1. Unscrew the union nut.
2. Clean the nozzle mouthpiece.
Troubleshooting guide

DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
The device is not working
1. Check the socket and the power
supply fuse.
2. Check the mains cable and the
mains plug of the device.
3. Switch on the device.
No water emitted from the nozzle
1. Fill up the fresh water tank.
2. Check the couplings on the spray
hose for correct seating.
3. Clean or replace the nozzle mouth-
piece.
4. Clean the fresh water filter.
5. Spray pump defective, contact cus-
tomer service.
Single-sided spray jet
1. Clean the nozzle mouthpiece.
Poor suction performance
1. Check that the cover is seated cor-
rectly.
2. Clean the seal on the cover and the
contact surface on the device.
3. Clean the fluff filter.
4. Check the suction hose for clogging;
clean if necessary.