English
71
authorised Kärcher Customer Service, in accordance with the in-
spection check list.
Daily before starting operation, see chapter 7.2 Safety check.
Lubricate all bearings after washing the vehicle.
If necessary have the safety checks according to the applica-
ble local regulations performed by the Customer Service de-
partment.
The intervals for inspection and maintenance work to be per-
formed by the customer are listed in the following table.
Additional maintenance work is to be carried out by the Cus-
tomer Service department in accordance with the inspection
checklist after 250, 500 (annually), 1000, 1500 or 2000 oper-
ating hours. Please inform the Customer Service department
in time.
12.4 Vehicle maintenance plan (to be carried out by customer)
Pos. Assembly
Activity
Daily
Weekly
every 500 hours
or once-a-year*
1
Cabin dust filter
Check for contamination.
Clean or renew a contaminated dust filter.
X (depending
on environ-
mental condi-
tions)
X
Renew
X (earlier if need-
ed)
2
Steering
Visual inspection
X
Check the bearings on the steering cylinder for
play.
X
3
Coolant expansion reservoir
Check the coolant level.
X
Check the mixing ratio water / antifreeze.
X
4
V-belt
Check the tension.
X
X
5
Screw connections
Visual inspection; tighten if needed.
X
X
6
Engine air filter
Check for contamination.
Clean or renew contaminated engine air filter.
X
Renew
X (earlier if need-
ed)
7
Engine oil
Check the oil level prior to travel commence-
ment.
X
Renew
X
8
Engine oil filter
Renew
X
9
Hydraulic oil tank
Check the hydraulic oil level.
X
X
10
Hydraulic couplings and connec-
tions
Check for leaks.
X
X
11
Battery
Check the battery for voltage, and is firmly in
place and leak-proof.
X
X
Check the electrolyte level and electrolyte
density in the cells (only low-maintenance bat-
tery).
X
X
Check the battery poles for oxidation, brush off
if necessary, and lubricate with terminal
grease. Make sure the connection cables are
firmly in place.
X
12
Exhaust system
Check the condition of the connecting ele-
ments and make sure they are firmly in place.
X
X
Visual inspection of the exhaust system for
cracking and leaks.
X
X
13
Parking brake
Check it is working correctly and is correctly
set
X
X
14
Radiator
Visual inspection of engine coolant, charge air
and hydraulic oil cooler for damage, firm fit,
tightness and contamination; clean if neces-
sary.
X
X
Check the coolant level.
Check the mixing ratio water / coolant.
X
X
Check the coolant hoses for leaks and dam-
age.
X
X
15
Tyres
Check the condition and filling pressure.
X
X
16
Wiping water container
Check the filling level.
X
X
17
Lighting and horn
Check they are working correctly.
X
X
18
Air-conditioner / heater
Check for functionality and leaks. Disinfect the
evaporator for the air-conditioner.
X
19
Warning sticker
Check the legibility, replace if necessary.
X
Summary of Contents for MIC 50
