Kärcher MIC 50, Manual, Page: 58 / 342

58 English
Selector switch for hydraulic PTO
1
Hydraulic PTO (80 l/min, front) activated
2
Hydraulic PTO (40 l/min, front) activated
3
Hydraulic PTO (40 l/min, front) and (40 l/min, rear) activated
4
Hydraulic PTO (40 l/min, rear) activated
5
Hydraulic PTO (80 l/min, rear) activated
The selector switch is used to activate the relevant connection for
the front and rear hydraulic PTO.
6.11.3 Centre operating console for MIC 70
1
PTO on/off
Position 1: Switch on the PTO
Press the black knob and pull the button
PTO on/off
Position 0: Switch off the PTO
Press the button downwards.
2
Selector switch for hydraulic PTO
3
Tempomat
4
Differential lock
5
Electrical PTO, front
6
Electrical PTO, rear
7
Switchover for double-acting control hydraulics AUX "rear/at-
tachment frame with tipping function"
8
Main switch, floating position
9
Dump valve (quick-lowering for AUX rear)
10
Attachment release switch (optional)
Note
This switch is responsible both for vibration dampening and for
attachment release (both options at the same time does not
work)
11
Locking enabling for shovel or fork in the optional front loader
attachment
12
Switch for bypassing floating position (PTO usable without
floating position)
ATTENTION
Only use with attachments that need this function!
13
Hazard warning switch
14
Potentiometer - engine speed
Selector switch for hydraulic PTO
1
Hydraulic PTO (100 l/min, front) activated
2
Hydraulic PTO (50 l/min, front) activated
3
Hydraulic PTO (50 l/min, front) and (50 l/min, rear) activated
4
Hydraulic PTO (50 l/min, rear) activated
5
Hydraulic PTO (100 l/min, rear) activated
The selector switch is used to activate the relevant connection for
the front and rear hydraulic PTO.
6.11.4 Rear operating console for MIC 50
1
Rotary knob for front power lift lowering speed
2
Rotary knob for attachment release (optional)
3
Ignition lock
4
Additional socket-outlet, 12 V
Ignition lock
1
Engine off
2
Ignition on
3
Preheating